Please wait for download, it may take a while as the video file is 41MB. If it still does not stream correctly you can right click on it and download. Scroll Up Scroll Down Your browser does not support the video tag.
Archives for
We know you move fast to fill cartridges. However, if you cause damage to the ribs of the mouth on the HP 88 or 940 cartridges it will likely cause failure to your fill process. The picture directly below shows the ribs as they should be. The image [...]
Filed Under: Reference Content
Some locations have not had old injector needles replaced. Please check yours. The image below shows what to look for on the needle. The new needle comes to an even point while the old one has the pin hole on the side of the tip. Using the old needles [...]
Filed Under: Reference Content
Scroll Up Scroll Down You may want to clean under this plate since it receives a lot of use. To do that, follow these steps: Tools: Phillips head screwdriver, Remove the screws holding the seal plate on the fill chamber receiver plate with a Phillips head screwdriver. Remove the seal pad. Both the seal pad [...]
Filed Under: Reference Content
Your Inkjet Refilling Business There are two important parts to your Inkjet cartridge refilling business. One is learning how to refill cartridges, but the other is working with your customer. It is important to accept cartridges that are likely to be successfully refilled. Remember: Accept ALL black cartridges. The information below will get you started. Accepting [...]
Filed Under: Tutorials