Scroll Up Scroll Down Although the steps for refilling HP 88 and 940 tank cartridges vary a little from the normal drill, prep, fill, and test routine, it is basically the same. There will be only three new steps. Here are simple and easy to use instructions for all operators to learn how to refill [...]
As of October 15th 2012, we have seen a new HP 60 Color and HP 60XL Color design and it will require a slight alteration of the refilling process. Simply use the HP2 adapter for Prep, then moved back to the HP3 Adapter for Fill. The old cartridge has a square back/bottom, and the new style [...]
Scroll Up Scroll Down Information Alerts on the InkCenter let you know current trends, changes, and updates to our ink-filling machine. The image displayed here is an example of what they look like. You will see them when your machine is logged out. There may be important breaking information for you to know here. [...]
Learn how to refill Espon cartridges Learn how to refill HP 88/940 cartridges
Scroll Up Scroll Down ALWAYS PERFORM STEPS IN THE SEQUENCE PRESENTED HERE. NOT DOING SO MAY CAUSE THE RE-FILL TO NOT BE SUCCESSFUL. Although the steps for refilling Epson cartridges vary a little from the normal drill, prep, fill, and test routine, all Epson cartridges use basically the same refilling technique and steps. There [...]
Scroll Up Scroll Down Use the enclosed Allen wrench to tighten screws on adapters. WHY YOU MIGHT DO THIS: Over time and certainly after a lot of use, screws on adapters may loosen. This is not so much periodic maintenance as it is something you will do when you notice they have loosened. Also, we [...]
Scroll Up Scroll Down Some locations have had problems with fluid spills using the T-1 adapter on tank cartridges. We believe that these problems are related to not seating the mouth of the tank cartridge in the adapter properly. We know that sometimes you are moving quickly and may not seat the cartridge appropriately.
Scroll Up Scroll Down Using the drill bit with a screwdriver handle is a good way to work around the problem of the drill press being out of service. Note in the pictures below how you would do this. It really doesn’t take much pressure to hand drill a cartridge. You are receiving a driver [...]